Human Resource Essay Example for Free

Human Resource Essay The paper would revolve around the discussion done over the concern regarding the rising wages of labor along with the decline in the supply of labor from China, which was previously considered to be the hub of labors from where the labor was supplied to other countries at a cheaper cost. Let’s discuss this issue in detail along with the explanation regarding the measures being taken by the organizations to change their human resource strategies. Answer – 1  Competing on the basis of labor costs can generate both positive and as well as negative outcomes for a company, or country. Talking about the brighter side, companies these days strive to achieve the optimum profitability level in order to stay in the competition. Therefore, what they do is to hire employees on part-time basis where employees would be paid on the basis of work they would do along with the working hours. This usually happens when the companies start a new venture such as, product development, its launching, or promotion. It does save huge costs for the company, but the turnover rate rises drastically. Talking about the negative side of the picture, either it is the company or country; it would result in a high turnover rate that often increases the costs such as, training costs. It is because when employees are hired by the companies, they must be trained about the job description that they are held responsible of. Therefore, investments are made by either sending them abroad or arranging workshops or training sessions. Obviously, when employees don’t get enough pay, they would leave their jobs; moreover, the supply of labor within the country would get minimized because workers might leave their country and go abroad to work for MNCs. Answer – 2 There is absolutely no doubt that many organizations consider their workforce as a main asset since the utilization of resources depend on their skills and abilities. Employees often demand the companies to value them, give them some autonomy, and involve them in the key managerial decisions where they can suggest new ideas. Companies, in order to keep their employees satisfied, introduce certain compensation packages and training sessions so that the employees think of themselves as part of the organization and get motivated. When managers invest over the training sessions and involve their subordinates in the key decisions, it becomes necessary for them to retain them at any cost or else they would leave their jobs. This would result in the loss of intellectual capital and loss of investment that was made to groom them by polishing their skills. As compared to the costs that incur for training the employees, the cost of labor force is much more than that. The reason is that when employees are trained and are retained by the company, it benefits the company not only in the short-run, but also in the long-run. Whereas on the flipside, when those skillful employees leave the company the labor costs take a domino effect because the firm would lose those employees, the investment made on them, and would have to recruit others, and then train them again. Consequently, these companies must focus on retention of employees, and that can be done by offering them attractive compensation packages, further training, giving autonomy, and promotion. Answer – 3 Companies these days are really focusing on reshaping their human resource strategies and forming them in such a way that not only keeps the employees contented, but also benefit the overall organization. There are several ways adopted by the firms these days and are explained below. Organizations these days encourage and support the presence of collectivist attitude. Collectivists define themselves by their group membership, give group goals priority over their personal goals, put more emphasis on harmonious relationships and experience more socially based emotions† (Robbins Judge, 2007) Moreover, individual rights is are also emphasized, that is to ensure the freedom of movement, physical security, and freedom of speech. Emphases are laid on the presence of health and safety and ensure the condemnation of actions or choices that are not safe for people, actions that violate law and ethical principles. Equal employment opportunities are ensured where they hire individuals based on their intellect, creativity, enthusiasm and the presence of Emotional Intelligence. In working structure, they value team relationship, team work, and team achievements; moreover, their employees value the importance of effective communication and employee involvement while making certain decisions and delegating the tasks. There ratio of discrimination seems to be getting lessened; everyone is given equal opportunities and there is no glass ceiling for females or people from different backgrounds. When it comes to improving and retaining the skills of employees, many organizations rely on the concept of Employability, i. e. – to continuously improve the employee’s working skills by the time to meet the requirements – (Daft, 1997). Answer – 4 Since the competition for workers in China is heating up where high wages are demanded by them and at the same time, companies seek to cut their redundant costs, especially from payrolls; therefore, employers would definitely shape some of the terms and conditions regarding the working conditions, job type, compensation, working hours, and job security. First of all, since the supply of well-educated and skillful workers is less in China, so firms would have to recruit those who are available even if they are demanding high wages. Of Among these workers, many of them come from abroad to find best possible job opportunity. Another change that can be made is in the working hours, where companies can decide the job type, job status, and working hours of a worker before recruiting him or her. In this case, a contract would be signed between the worker and the company in which all the responsibilities and liabilities of both of them would be outlined, along with the penalties that either party would have to pay in case of violating the contract. A very enticing strategy that can be brought on is to introduce the Performance-based compensation play, where the employees whether they are contractual or regular, would be paid on the basis of their performance and productivity level. Moreover, chances of promotion would only be for those who perform well and benefit the organization. This would result in provoking the motivation among the employees to gain more knowledge and skills, perform better, and abide by the rules and regulations. Not only this, the turnover rate that China is currently facing, would decline to a great extent and would attract the best available talent, which would be beneficial for both the employees and the business.

Noise Pollution Essay -- environment environmental

Noise Pollution Noise pollution is not a necessary price to pay for living in an industrial society. Much can be done to reduce the severity of the problem. For example, vehicles and other machines can be built to produce less noise. Four-cycle engines can replace much noisier two-cycle engines in such products as lawnmowers, motorboats, and jet skis. Labels that indicate the noise levels of appliances and tools can help consumers avoid noisy products and choose quieter alternatives. Even after noise is generated, steps can be taken to reduce human exposure to it. At homes or in offices, insulation of walls and double-glazing of windows can muffle sound from traffic, neighbors, and other sources from the outside world. Sound walls along highways can shield nearby neighborhoods from traffic noise. Individuals should protect themselves with earplugs or mufflike ear protectors, particularly when noise levels exceed 85 decibels. In the industrialized nations, governments have laws and policies to counter noise pollution. In the United States, at least six federal agencies are involved in controlling noise pollution. Since 1969 the FAA has monitored and controlled noise from airplanes. The agency requires that new aircraft meet specified noise standards and that old ones be retrofitted or retired. Local airport authorities, with FAA approval, reduce the impacts of noise pollution by routing flights over water or unpopulated areas on takeoff and landing, and by limiti...

The Electrical Market Generation Engineering Essay

In a deregulated electricity market, the coevals, transmittal and distribution sectors are operated by different companies. This may give rise to congestion in transmittal lines due to miss of co ordination between different sectors. It may besides happen in a vertically incorporate market but it can easy be taken attention of since all the three sectors are controlled by one entity. Congestion can interrupt the demand and supply market. It can straight impact the net incomes of the market participants. Without congestion market monetary value will be unvarying but with congestion the monetary values in some countries will increase and in other countries will diminish. Congestion changes the pre despatch program of bring forthing units in order to run into the energy demands with cheaper bring forthing units cut downing their end product whereas expensive units increasing their end products in the engorged countries. This makes the energy market less efficient. By congestion we mean that the transmittal web is unable to incorporate all of the coveted minutess due to misdemeanor of the system bounds. These could be thermic, electromotive force, little signal stableness bounds etc. These bounds are violated due to the breaks in power flow in transmittal lines. Therefore it becomes imperative to take steps that would forestall or acquire rid of congestion in transmittal lines. Let ‘s hold a expression at a congestion illustration. Suppose that there is a part where the electricity supply becomes really inexpensive. This would ensue in an increasing demand as more and more people would desire to travel for that electricity seting a immense sum of burden on the system. In order to run into the increasing demand, there would be heavy flow of power over the transmittal lines. This would incur losingss every bit good as the stableness bounds would be threatened ensuing in congestion. There are two ways to cut down congestion. One is the proficient manner, by utilizing the FACTS devices and the transformer pat accommodations whereas the other one is related to the market e.g auctioning, re-dispatching etc.1.2 AimsThe aims of this thesis undertaking are as follows: To Analyze the FACTS devices To Identify the different jobs due to congestion To show the usage of FACTS devices in pull offing congestion in pool market To smoothen the Locational Marginal Prices ( LMP ) and maximise the societal public assistance Economic consideration in arrangement of FACTS1.3 Scope of ThesisThe thesis will get down with the literature reappraisal on optimum power flow, Power flow restraints, FACTS devices, power flow control, how FACTS are used to increase the transmittal capacity in order to cover with the congestion direction in transmittal systems. Electricity market theoretical account will be generated and by utilizing the FACTS devices the LMP will be smoothened and the societal public assistance will be maximized.. In the terminal based on the consequences, recommendations and decisions would be given consequently.Literature Review2.1 Optimum Power FlowIn 1960 some extensions were made in the conventional economic burden despatch job called optimum power flow ( OPF ) . OPF simulation is used to happen the optimum solution to a job. A system can be modeled by an nonsubjective map. This nonsubjective map could be minimising the production cost, minimising the transmittal losingss etc. It depends on what type of market the nonsubjective map represents. The OPF is used to command different variables in such a manner that the nonsubjective map can be minimized ensuing in the addition in overall efficiency of the system.2.2 Power System ConstraintsWith the growing of electric public-service corporations all over the universe, the transmittal systems are being pushed closer to their stableness bounds whilst more and more quality of power is being demanded. The transmittal of power over an country or a part may be limited due to certain power restraints such as: Steady province power transportation bound Voltage stableness bound Dynamic stableness bound Transeunt stableness bound Oscillations muffling bound Thermal bound These are called the constrictions as they limit the sum of power fluxing through transmittal lines.2.3 Congestion ManagementCongestion direction is a major job faced by the independent system operators ( ISO ) in the deregulated electricity environment as it has a immense negative impact on market monetary values and the market trade ensuing in breaks and pecuniary punishments under some status. FACT devices like TCSC, TCPAR ( more on this in the following chapter ) can assist to cut down congestion, smoothen locational fringy monetary value and maximise the societal public assistance. [ 1 ] The distinguishable congestion direction systems widely being employed are Nodal pricing method Zonal pricing method These are the congestion direction theoretical accounts that are based on optimum power flow algorithm [ 2 ] . In [ 3 ] , two attacks covering with the direction costs are studied. The first attack is the nodal pricing which forms the model for the pool theoretical account. The 2nd attack is based on cost allotment processs proposed for the bilateral theoretical account. Pool and the bilateral theoretical account are compared. The bilateral theoretical account would easy hold been the obvious pick for clients if it had n't been for the particular features of electricity. These features produce two jobs. The first job relates to the presence of transmittal restraints whereas the 2nd one relates to transmittal losingss. The pool adjusts these particular features of electricity in trading procedure. The locational facets of pool theoretical account are based on theory of nodal topographic point pricing. In [ 4 ] , zonary congestion direction has been presented. Importance of existent and reactive power despatchs in relieving the congestion direction has been highlighted. Congestion direction in pool theoretical account is formulated as a Non Linear Programming ( NLP ) and it is solved by utilizing the fittingness distance ratio atom drove intelligence. In [ 5 ] , coordination between the pool and the bilateral trading in congestion despatch in intercrossed market theoretical account is investigated. A mathematical theoretical account of co-ordinated congestion despatch is created which relates the rate of pool buying cost and the curtailment rate of contracts to the precedence of different trades in the intercrossed electricity market.2.4 FACTSThe conventional ways of heightening power system control were to utilize Series capacitance to command the electric resistance, switched shunt capacitance and reactor to command the electromotive force, stage switching transformer to command the angle etc. Now in the modern universe FACTS accountants are being used. The construct of FACTS was foremost introduced in 1990. FACTS stand for Flexible AC Transmission Systems. FACTS is defined by the IEEE as â€Å" a power electronic based system and other inactive equipment that provide control of one or more AC transmittal system parametric quantities to heighten controllability and increase power transportation capableness [ 2 ] . The FACTS devices late became popular due to their efficient power controllability in power transmittal lines. There are a figure of FACT devices that are presently being used each holding their pros and cons. The power is generated and distributed to the consumers over transmittal webs. The power flow is related to the electric resistance of these transmittal lines. Greater the electric resistance lesser will be the power flow. When there is a rush in demand, the power lines with low electric resistance will acquire overloaded before the high electric resistance 1s restricting the power that can be transmitted through the high electric resistance lines. There are two ways through which the lifting demand can be met. They are: – Build more transmittal lines in order to increase the transmittal capacity Use the FACTS devices in the bing transmittal web in order to increase their transmittal capacity by commanding the power flow. The former one is non executable since it requires a immense investing and has some environmental concerns associated with it. The latter 1 is what we would be looking at. The basic applications of FACT devices are: They increase the bing transmittal line power capableness Control the power flow Decrease in reactive power profiting bring forthing companies because lesser the reactive power more will be the existent power. The clients are charged for the existent power they consume. To increase the stableness Voltage control Increase the security of the system. In [ 6 ] , congestion direction methods are considered. The first is the re despatch of the coevals agenda formed by the market. Congestion direction cost is evaluated utilizing the coevals agenda. The installing and the operation of flexible jumping current transmittal systems ( FACTS ) devices in the transmittal lines for the intent of countering congestion is besides considered. A cost benefit analysis is proposed which justifies the economic feasibleness of FACTS devices. After transporting out trials on IEEE 14 coach system, this paper concludes that when FACTS devices are employed in transmittal lines at optimum places they were able to cut down the sum of power to be re dispatched every bit good as the cost of congestion. In [ 7 ] , congestion caused by the increasing figure of bilateral contracts is alleviated by utilizing two methods. Cost free and non cost free agencies. The former trades with the stage shifters, FACTS devices. The system with and without FACTS devices is compared. The optimum power flow ( OPF ) consequence shows that the single power minutess suffer less curtailment with FACTS. The usage of FACTS device called thyristor controlled series compensator ( TCSC ) is discussed. The execution of FACTS devices in bilateral despatch model to keep system stableness and security is proposed. The development of simple and efficient theoretical accounts for optimum location of FACTS devices to undertake congestion direction by the optimum control of their parametric quantities is proposed in [ 8 ] . In a engorged environment, the sensitiveness factors can efficaciously be used to find the optimum location of FACTS devices, TCSC and TCPAR. However this paper does non cover with the optimum location of other FACTS devices such as SVC, STATCOM. In [ 9 ] , steady province theoretical accounts of FACTS devices are formulated based on PIM and incorporated into optimum power flow ( OPF ) . By making this, FACTS tend to acquire flexible due to greater grade of freedom for the OPF solution infinite. The job is solved utilizing consecutive quadratic scheduling ( SQP ) in MatLab. The consequences clearly show that the FACTS devices greatly enhance the electromotive force stableness every bit good as the power transportation capableness.2.5 Controllability of Power FlowThis subdivision will cast visible radiation on the parametric quantities that affect the power flow in transmittal lines. This is indispensable in understanding the working of FACTS for congestion direction. To maintain things simple consider a two coach system in figure 2.1Figure 2.1 Two Bus SystemThe transportation of power between the two points is given by( 2-1 )Where is is Power received is Voltage sent is electromotive force received is characteristic electric resistance of the line eristic electric resistance of the line system in figure 2.1 power flow in transmittal lines. This is indispensable in understand is transmittal angle We have assumed that all the line losingss are neglected. For a short line this equation can be simplified to( 2-2 )Since Equation 2-2 merely states that the power fluxing through a transmittal line depends on three things, electromotive force, angle and electric resistance. The most of import decision that can be drawn from this equation is that higher the electric resistance of a power line lesser will be the power flow through it. Power flow is ever through those lines that have got low electric resistance.Chapter 4Electricity MarketThis chapter negotiations about the deregulated electricity market. How this market construction came into being, what advantages and disadvantages does this current construction has is discussed in the deregulated electricity market subdivision. It so sheds visible radiation on the different market theoretical accounts that are adopted by assorted states. The three market theoretical accounts that exist and discussed in this chapter are Pool theoretical account, Bilateral Model and Hybrid Model. An nonsubjective map for the pool market is formulated. Here the aim is the societal public assistance maximization.MethodologyThe first measure is to reexamine the different sorts of FACT devices. Get familiar with their operation. The following measure involves the use of these FACT devices to relieve congestion in power lines. After that a market theoretical account would be generated that would assist us to analyze the effects of FACTS devices on the market parametric quantities such as LMP, societal public assistance etc. A package will be used to transport out this undertaking. The consequences would be shown with the aid of graphsClasss of FACTS DevicesFACTS devices can be classified into the undermentioned classs.Series CompensationIn series compensation, the FACTS devices are connected in series in transmittal lines to shoot electromotive force. It works as a governable electromotive force beginning. These series FACTS devices can be a variable electric resistance e.g a capacitance. Series induction occurs over long transmittal lines doing a electr omotive force bead. To counterbalance that electromotive force bead, the series capacitances are coupled.Shunt CompensationIn shunt compensation, FACTS devices are connected in analogue to the transmittal lines. These devices inject current at the point of connexion in the transmittal lines. They act as a governable current beginning. Shunt compensation if of two types: – Shunt capacitive compensation This method is implemented when there is a demand to better the power factor. Whenever there is an inductive burden connected to the power system, it ‘s traveling to ensue in a lagging current doing the power factor to dawdle. This is non desirable since the low power factor relates to high sum of current drawn by the burden ensuing in immense energy losingss. A shunt capacitance is connected that draws current taking the electromotive force beginning which helps better the power factor. Shunt inductive compensation This method is used when there is a really low burden connected at the having terminal. This causes a really low current to flux through the transmittal lines. Shunt electrical capacity in the transmittal line causes voltage elaboration. This phenomenon is known as Ferranti consequence. The electromotive force at the having terminal becomes greater than the electromotive force at the directing terminal. To counterbalance, shunt inductances are connected across the transmittal lines.Combined Series-Series CompensationTwo FACTS devices are connected individually in series in a multi line transmittal system. Each of the devices provides independent series reactive compensation for each of the lines.Combined Series-Shunt CompensationIn this constellation, a combination of a series and shunt FACTS devices are used. The shunt device injects current into the system whereas the series device injects electromotive force. In order words this sort of constellation allows to hold an independent control over existent and existent and reactive power fluxing through the transmittal lines.Examples of Series CompensationInactive Synchronous Series Compensator ( SSSC ) Thyristor Controlled Series Capacitor ( TCSC ) Thyristor Controlled Series Reactor ( TCSR ) Thyristor Switched Series Capacitor ( TSSC ) Thyristor Switched Series Reactor ( TSSR )Examples of Shunt CompensationInactive Synchronous Compensator ( STATCOM ) Inactive Var Compensator ( SVC )Example of Combined Series-Series CompensationInterline Power Flow Controller ( IPFC )Example of Combined Series-Shunt CompensationUnified Power Flow Controller ( UPFC ) Unified Power flow accountant ( UPFC ) is the most powerful FACTS accountant yet. It has the ability to command both the reactive and active power flow in transmittal lines whereas the other FACTS accountants named above could either command existent or active power flow. It is capable of commanding all the parametric quantities such as electromotive force, electric resistance and angle that are responsible for the power flow. The most widely used FACTS devices are the 1s that involve the thyristor engineering. We will analyze merely two FACTS devices in item since those are the 1s that will be implemented for congestion direction. Those two FACTS devices are: – Inactive Synchronous Compensator ( STATCOM ) Inactive Synchronous Series Compensator ( SSSC )Inactive Synchronous Compensator ( STATCOM )The inactive synchronal compensator ( STATCOM ) was antecedently known as inactive synchronal capacitor ( STATCON ) . It is based on a solid province synchronal electromotive force beginning that is merely like an ideal synchronal machine without a revolving mass. These devices generate a set of sinusoidal electromotive forces at cardinal frequences with quickly governable amplitude and stage angles. Fig 4.1 shows the generalised construction of a electromotive force beginning convertor. The input of a STATCOM is a DC electromotive force which it converts into an AC end product electromotive force at a cardinal frequence in order to counterbalance for the reactive and active power needed by the system. Qref and Pref are the mention signals that control the amplitude of the end product electromotive force V and the stage angle I? , severally. Fig 4.1 Generalized synchronal electromotive force beginning So by altering the Qref, in other words by changing the electromotive force the reactive power exchange between the inverter and the AC system can be controlled. If the amplitude of the end product electromotive force is greater than that of the AC system electromotive force, the inverter produces reactive power for the AC system. If the amplitude of the end product electromotive force is varied such that it becomes less than the AC system electromotive force, the inverter absorbs the reactive power and if both the AC system electromotive force and the end product electromotive force is the same, there is no reactive power exchange. By changing stage angles between the inverter end product and AC system electromotive forces, the existent power exchange between the inverter and the AC system can be controlled. If the inverter end product electromotive force leads the AC system electromotive force, existent power is supplied to the AC system by the inverter. If the inverter end product electromotive force lags the AC system electromotive force, the existent power is absorbed from the AC system by the inverter. Figure 4.2 shows the basic construction of STATCOM and it ‘s V-I features are shown in Figure 4.3. By detecting figure 3.3 it ‘s clear that the accountant can supply both reactive and inductive compensation and is able to command the end product current between the specified maximal capacitive and inductive scope independent of the AC system electromotive force. It can supply full capacitive end product current at any practical electromotive force. It ‘s more effectual than SVC in supplying transmittal electromotive force support every bit good as bettering the stableness of the system since SVC can provide thinning end product current with diminishing system electromotive force as judged by the designed maximal tantamount capacitive entree. The comparing of STATCOM with SVC can expected to give a 50 per centum decrease in the physical size of the installing. Another advantage of STATCOM over SVC is that it is able to back up higher tonss than the SVC can for the comparable MVAr evaluation. The STATCOM may hold an increased transient evaluation in both the inductive and capacitive operating parts, which can further heighten its dynamic public presentation. The conventional SVC were equipped with transeunt volt-ampere soaking up capableness merely. There was no manner that they could transiently increase the var coevals since the maximal capacitive current it can pull is austerely determined by the value of its maximal electrical capacity and the magnitude of the system electromotive force. The transient evaluation of the STATCOM relies on the features of the power semiconducting materials used and the maximal junction temperature at which each of these devices can be operated. Furthermore, STATCOM does non significantly change the bing system electric resistance, which is another advantage over the inactive volt-ampere compensators ( SVCs ) . To cut the treatment short, STATCOM has better features over SVC ; the maximal reactive power end product will non be affected by the electromotive force magnitude. Therefore, it exhibits changeless current features when the electromotive force falls below the bound. The steady province power exchange between the accountant and the AC system is largely reactive, as active power is merely consumed to provide for the internal losingss. Fig 4.2 Basic construction of STATCOM Figure 4.3 V-I features STATCOM can be controlled in two ways.Phase controlIn this technique the stage displacement I? is varied in order to command the STATCOM ‘s end product electromotive force magnitude.Pulse Width Modulation ( PWM )This technique allows the independent control of the magnitude of the end product electromotive force every bit good as the stage displacement that represents angle of the end product electromotive force. The control of DC electromotive force is separate from that of AC end product electromotive force.Synchronous Series Compensator ( SSSC )A synchronal electromotive force beginning that has a DC to AC inverter with gate turn off thyristor can be used for series compensation of transmittal lines. SSSC is reasonably similar to STATCOM as it involves DC capacitance fed electromotive force beginning input which generates a three stage electromotive force at cardinal frequence. This in bend is injected into the transmittal line with the aid of a transformer connected in seri es with the system.. What SSSC does is that it straight controls the current and indirectly controls the power flow by commanding the reactive power exchange between the SSSC and the AC system. It has got an advantage over another FACTS accountant called TCSC, which is that SSSC does n't endure from the resonance job that can be encountered in TCSC since it does non impact the electric resistance of the transmittal lines that much. Fig 4.4 Basic construction of SSSC Figure 4.4 shows the basic construction of SSSC. It shows a electromotive force beginning that produces an appropriate at the cardinal AC system frequence in series with the line to call off the electromotive force bead, Vc to some extent. The end product of synchronal electromotive force beginning is locked with the dawdling relationship to the current and it is so injected in series with the transmittal line. If injected electromotive force magnitude peers that of the line current, a series compensation tantamount to that provided by a series capacitance at cardinal frequence is acquired. Mathematically it can be represented as where Vc is the counterbalancing electromotive force phasor Iac represents the line phasor Ten is line impedence K is called grade of series compensation The chief thing is to command the rms magnitude Iac of the AC current and the rms magnitude Vc of the accountant ‘s AC electromotive force phasor in other words to command the reactive power injected or absorbed by the accountant. Assuming the reactance of matching transportation is negligible, the AC end product electromotive force can be straight controlled through the inverter electromotive force Vinv which can be controlled by bear downing or dispatching the capacitance. In steady province if the accountant is presenting reactive power, the stage displacement I? of the inverter electromotive force with regard to the AC current is -90 grades. On the other manus if the accountant is absorbing reactive power so the stage displacement of the inverter electromotive force with regard to the AC current becomes 90 grades. Hence we can alter the DC electromotive force Vdc and the corresponding inverter end product electromotive force Vin merely by changing the stage displacement par ametric quantity that would bear down or dispatch the capacitance. Fig 4.5 Operation of SSSC Figure shows the operation of SSSC. By presuming that the injected electromotive force in series with the line can be achieved if the DC energy storage has infinite capacity, the electromotive force stage angle can be chosen individually of the line current over 360 grades with the magnitude that is between 0 and Vc soap. This means that the synchronal electromotive force beginning must be able to bring forth and absorb both the existent and reactive power. The accountant is responsible for the production of the reactive power whereas the existent power comes from the DC energy storage device. This storage device besides generates a small active power that is merely plenty to get the better of the accountant losingss.A Time FrameWeekAims1 2 3 4 5 6 7 8 9 10 11 12 13AAAAAAAAAAAAAAUndertaking proposalAAAAAAAAAAAAAFACTS executionAAAAAAAAAAAAAMarket theoretical account SimulationAAAAAAAAAAAAAFACTS in market theoretical accountAAAAAAAAAAAAAConsequencesAAAAAAAAAAAAAAnalysisAAAAAAAAAAAAADecisionAAAAAAAAAAAAARecommendationsAAAAAAAAAAAAA

Contemporary Social Theory Essay - 595 Words

Two major approaches to contemporary social theory are the Marxian materialist approach and the structural functionalist approach. The materialist approach was developed from the work of Karl Marx, who believed that the economic order shapes society. The functionalist approach was developed from the work of Comte and Durkheim, stating that is the combination of all of society’s institutions that shapes society. An organic analogy is most often used to explain structural functionalism. The analogy represents society with the human body and social structures and institutions are represented by the body’s organs. For a human being to survive, the body must perform certain functions to solve problems and meet needs. For example, we must†¦show more content†¦The manner in which we satisfy our needs is referred to as our modes of production. The modes of production include the tools people use, the technologies society has created, and the acquired skills and knowledge, all in relation to material production. The organization and social relations in material production forms an economic order and that economic order shapes society. All aspects of society is influenced by the economic institutions. nbsp;nbsp;nbsp;nbsp;nbsp; There are numerous differences between the preceding approaches. A major difference is in viewing the foundations of society. Materialists believe it is the economic order that shapes society; functionalists believe it is all of the interrelated components in society that shapes the whole. Another difference is how they explain social conflict. Materialists see social conflict as the result of conflict between social classes in the economic order. For example, rich executives (ruling class because they control the economy) cut jobs, creating unemployment in the subordinate class. Conflict in the functionalist view, however, stems from differences in values, norms, etc., such as racism and sexism. Another difference is in the allocation of power. Functionalists believe power is held by the people who hold the traits associated with power, and who hold common values. Those in power serve to meet the entire society’s wants and needs. MaterialistsShow MoreRelatedContemporary Socia l Theory And Functionalist Approach1457 Words   |  6 Pagespreference over other in contemporary social theory these themes consist of relationship between society and self, nature of social life, possibility, and role of social transformation, structure of social institutions and themes such as class, gender, and race. Contemporary social theory is given importance due to the fact that helps in evaluating the societal features easily. In this paper, the three different contexts that contribute in the development of contemporary social theory are discussed andRead MoreContemporary Human Behavior Theory : A Critical Perspective For Social Work3043 Words   |  13 PagesAccording to â€Å"Contemporary human behavior theory: A critical perspective for social work†, in social work there are several terms associated with the discussion of theories. The terms are theory, perspective, models and practice models. The term theory is used to explain and predict. Theories exist to h elp practitioners understand why something happens and to help predict future occurrences. To understand theory construction, explanation, and prediction, it is imperative to understand the differencesRead More Values in Contemporary Social Work Essay examples2508 Words   |  11 Pagesclient and social worker. Social workers operate within society, not only to assist the individual but to create a more cohesive society. Values and ethics permeate the whole of social work practice and the society within which it practices (Shardlow 1989). Values are afforded a high position within social work, this is highlighted in: â€Å"Social work is a professional activity. Implicit in its practice are ethical principles which prescribe the professional responsibility of the social worker† (BritishRead MoreWhat Are Some of the Notable Differences Between Classical and Contemporary Theories of Social Justice? What Are Some Notable Similarities?1252 Words   |  6 Pagesdifferences betwe en classical and contemporary theories of social justice are the way the issue is explored. Differences also occur in the emphasis placed on different aspects of social justice and how to achieve it. The notable similarities seem to be that there is a need for social justice and that to achieve social justice many changes need to occur. Another similarity is the debate that social justice is not an easily achievable outcome. In classical theories about social justice it is looked at fromRead MoreTheories And Rehabilitation Of The Criminological Theory Book By Frank Williams IIi And Marilyn D. Mcshane Essay862 Words   |  4 PagesCriminological theory paper: Ch.14 theories and Rehabilitation Chapter 14 of the Criminological Theory book by Frank Williams III and Marilyn D. McShane is dedicated to Contemporary theories of Process. Contemporary theories of process in this chapter include general strain theory, self-control theory and developmental life course theory. These three theories focus on â€Å"the importance of factors in early life† (Williams McShane 2014 Page 204). I believe the theories that are reviewed in this chapterRead MoreFor All We Think We Know About Crime There Is Still Much1085 Words   |  5 Pagesin sociology that helps explain this idea is the knowledge of control theory. This theory helps uncover what processes or environments lead to a life of criminal acts while at the same time it allows for a chance to learn about our world from a social perspective. It will be important to investigate what in fact control theory is, how it applies to the world in a sociological manner and to explore the implication of the theory in real-time crime. As children, we learn to avoid things that will hurtRead MoreSocial Cognitive Theory Is The View That People Learn By Watching Others1299 Words   |  6 Pages Social cognitive theory is the view that people learn by watching others. In psychology, it explains personality in terms of how a person thinks about and responds to one s social environment. For example, in the 1960s Albert Bandura (a pioneer in social cognitive theory) argued that when people see someone else awarded for behavior, they tend to behave the same way to attain an award. People are also more likely to imitate those with whom they identify. Bandura famously illustrated socialRead MoreSocial Control Theory Essay1320 Words   |  6 PagesThe social control approach to understanding crime is one of the three major sociological perspectives in contemporary criminology. Control theorists believe that conformity to the rules of society is produced by socialization and maintained by ties to people and institutions— to family members, friends, schools, and jobs. Put briefly, crime and delinquency result when the individual’s bond to society is weak or broken. As social bonds increase in strength, the costs of crime to the individual increaseRead MoreThe Social Exchange Theory in Interpersonal Relationships1577 Words   |  7 Pagesdifferent levels of interpersonal communication and theories of interpersonal communication. One of the theories that is used to explain changes in social behavior is the social exchange theory. The social exchange theory proposes that social behavior is the result of an exchange process between two people. The basic concept of the exchange theory is that it emphasizes the cost between the interactions of people and their social environment. Exchange theory attempts to explain human behavior under the contentRead MoreEssay about The Sources of Self-Control1178 Words   |  5 PagesThe nature of self-control theories, and a possible explanation of what draws individuals to commit crime, stems from research conducted by Michael Gottfredson and Travis Hirschi in 1990. Initially, Hirschi’s early research sugg ested that sustainment of self-control was a result of family bonds, academics, work, and/or religious and personal reasons. Hirschi had concluded that â€Å"the major ‘cause’ of low self-control thus appears to be ineffective child-rearing† (Lilly et al., p. 97) However, by 1990